Submissions

Now showing items 1341 - 1360 of 4890

Comparison of fibre quality from Round and Conventional Modules

Van Der Sluijs, Rene (CSIRO Materials Science And Engineering, 2012-06-30)

The John Deere (JD) 7760 harvester has been taken up very quickly by the Australian cotton industry as these machines can harvest cotton virtually non-stop, making them very productive, requiring little labour as it d

Industrial testing and commercial development of moisture and contamination sensors for Australian gins (Ginning II)

Krajewski, (Cotton Catchment Communities CRC, 2012-06-30)

Two ambitious objectives were set for this project.

Delivering Regional Extension in Qld Farming Systems - Darling Downs

Weir, Duncan (2012-06-30)

This project has delivered on two key areas.

Travel: Disease surveys in commercial cotton in the Ord River Irrigation Area

Smith, Linda (Queensland DEEDI, 2012-06-30)

The 2011 season is the first season of commercial cotton production in the Ord region for 10+ years, making this year a suitable time for establishing baseline frequencies and severities of endemic diseases.

Substitutes for pupae busting - targeting larvae or moths: Pilot study

Gregg,Peter (Cotton Catchment Communities CRC, 2012-06-30)

The Australian cotton industry depends heavily on genetically engineered Bt cotton (currently in the form of Bollgard II®) which provides resistance to the key pests of cotton, larvae of the moths Helicoverpa armigera

PICSE Schools

Russell, David (Cotton Catchment Communities CRC, 2012-06-30)

PICSE Program: The Mission of the Primary Industry Centre for Science Education or PICSE is to: &quote;Increase participation in science professions that support primary industries&quote; The program aims to a

Pushing the Boundaries II: Agribusiness Careers

Corish, Nigel (Macintyre Cotton Grower Association (CGA), 2012-06-30)

The Cotton Research and Development Corporation approached the MacIntyre Valley Cotton Growers Association (MVCGA) to undertake a human capacity project to receive a $10,000 grant.

Substitutes for Pupae busting - targeting larvae moths

Gregg, Peter (University Of New England, 2012-06-30)

The Australian cotton industry depends heavily on genetically engineered Bt cotton (currently in the form of Bollgard II®) which provides resistance to the key pests of cotton, larvae of the moths Helicoverpa armigera

Travel: World Cotton Research Conference India, 2011

Kennedy, Ivan, Van Der Sluijs, Rene, Tan, Daniel, Pereg, Lily, Yeates, Steve, Broughton, Katie, Cottee, Nicola, Walsh, Tom, Visser, Francois (University Of Sydney, CSIRO Materials Science And Engineering, University Of New England, University Of Queensland, CSIRO Plant Industry,CSIRO Ecosystem Sciences, 2012-06-30)

The Fifth World Cotton Research Conference(WCRC) is held annually and in 2012 dealt with a wide range of issues concerning the cotton industry, from seed production, plant growing and the farm to fibre quality,

Regional Cotton Market Seminar Program

Johnson, Pete (Cotton Compass Pty Ltd, 2012-06-30)

Cotton Compass prepared a series of modules for planned cotton marketing seminars as requested by CRDC .

Benchmarking furrow irrigation efficiency in the Australian Cotton Industry

Gillies, Malcolm (University Of Southern Queensland, 2012-06-30)

Despite the increased adoption of pressurised irrigation systems in recent years, furrow irrigation is and will remain to be the dominant application technique in the Australian cotton industry in the foreseeable futu

Sponsorship Australian Cotton Water Story - A Research Review Forum Aug 2011

Armytage, Philip (CRDC, 2012-06-30)

Term of Reference I: Progress of cotton water research to desired economic, environmental and social outcomes since 2005

Term of Reference 2: Assess strength of cotton water story

Feasability study into Utilising Biomass Burner at Tandou Gin

McClure, David (Menindee And Lower Darling Cotton Grower Association (CGA), 2012-06-30)

A CRDC Small Capacity Building Project Grant was successfully applied for to conduct a feasibility study into utilising a biomass burner at the Tandou Gin to off-set the increasing costs of LPG used in the ginning pro

Responding to climate in the CG Irrigation sector

Pendergast, Lance (Cotton Catchment Communities CRC, 2012-06-30)

FR

Field to Fabric course

Van Der Sluijs, René (2012-06-30)

With an increase in cotton production and the expected influx of new people into the industry, understanding spinners' requirements will be of the utmost importance to assist the Australian cotton industry to con

Tools to manage fertigation technologies in citrus orchards

Treeby, Michael (NSW Department Of Primary Industries, 2012-06-30)

Drip irrigation/fertigation (“advanced fertigation”, “open hydroponics”) is being adopted by

the Australian citrus industry. Hardware sophistication and the complexity of management

Delivering NRM technical Advice in Narranri and Wee Waa Districts

Vogel, Stacey (Cotton Catchment Communities CRC, 2012-06-30)

Schedule 1.2 employed a Catchment Officer who was located at the Cotton CRC Office at Myall Vale and was responsible for delivering NRM technical advice, developing extension material and developing and managing inves

Travel & Laboratory extension to DAQ1201

Sharman, Murray (Queensland DEEDI, 2012-06-30)

The relationship of Cotton leaf roll vitus (CLRV) from Thailand to Cotton leafroll dwarf virus(CLRDV) from Brazil or Cotton bunchy top virus (CBTV) from Australia is unclear as no sequence information is currently pub

Cotton CRC Evaluation

Powell, Janine (GHD Clients People Performance, 2012-06-30)

The Cotton CRC and CRDC sought to gather quantitative information on cotton growers' usage and adoption of research and key farming practices, with a particular focus on change since 2001, in order to

Water Smart in Cotton & Grains NSW

Montgomery, Janelle (NSW Department Of Primary Industries, 2012-06-30)

A knowledge system model to improve the effectiveness of the transfer of(irrigation)

information to growers was developed and tested. Knowledge can be described as